"NO MORE FROZEN PIPES"
This section concentrates on pipe frost protection applications.
Only two products are needed for most frost protection applications - these are TRACE10J and TRACE20J - the reason:- between them, they are safe for use on both metal and plastic pipes ranging in size from 15mm to 150mm diameter, and only a straight run of heating cable is needed along the pipe - one metre of TRACEJ per metre of pipe
TRACEJ is a best seller. It is self regulating c/w earth & polyolefin outerjacket. It is the right choice for projects and contracts in most industrial and construction environments.
First Trace Heating Direct are never undersold in the TRACEJ range on a like for like basis.
TRACEPAK - 30m packs, a simple kit containing:
30m reel of jacketed self regulating heating cable rated either 10 or 20w/m
2 off Connection & End Seal Termination Kits
1 off 20m Roll of Glass Cloth Fixing Tape
5 off Warning / Caution Labels
IDEAL AS CONTRACTOR PACKS
Important Note: Any size of TRACEPAK can be supplied, just ask and we will make up the pack and deliver next day.
ThermMAT is a heating mat with a twin wire heating cable pre-mounted onto commercial grade fibreglass mesh that holds the heating cable together to simplify installation. Manufactured in a wide range of ready made sizes and with the supply lead wire at one end only, it is supplied on a roll for quick and easy installation – this design offers maximum flexibility to the installer; easy to plan and easy to lay and suitable for large or small areas.
One side of ThermMAT is extremely sticky for quick and easy installation to the sub-floor.
ThermCABLE is a twin wire heating cable supplied on a plastic reel with the supply lead wire at one end only. ThermCABLE requires more time to install than ThermMAT but it can provide the installer with extra layout flexibility, especially in smaller areas with obstacles, such as en-suites, shower rooms and bathrooms. A table provides a guide to the floor area permutations at various watts density and cable spacing.
With ThermMAT or ThermCABLE there is no need to get two ends of cable back to a termination point.
ThermCONTROL is a digital programmable control suitable for flush mounting. Automatic large blue back-light display (Turns off after 30 seconds from the last key press). 10 Year flash memory of programmed settings of 5 day/2 day Program (Weekday/Weekend programming).
Approved by design houses for looks and available in white, silver or brass. CE approved.
In "Technical Forum - FAQS" we plan a series of articles on trace heating and floor heating aimed to help the wholesaler and installer.
In this section your own experiences can be shared with everyone and FTHD would like to hear from anyone interested in a feature for the section.
Again. FAQS are helpful and your input to this section would be appreciated.
Wholesale Groups should refer to their individual Trading Agreement and Purchasing / Buying Guides for information on discounts and Terms of Trading with First Trace Heating Direct.