"NO MORE FROZEN PIPES"
This section concentrates on pipe frost protection applications.
Only two products are needed for most frost protection applications - these are TRACE10J and TRACE20J - the reason:- between them, they are safe for use on both metal and plastic pipes ranging in size from 15mm to 150mm diameter, and only a straight run of heating cable is needed along the pipe - one metre of TRACEJ per metre of pipe
TRACEJ is a best seller. It is self regulating c/w earth and polyolefin outerjacket , offering high quality electrical and mechanical protection.
TRACEJ meets the standards of BS6351 Grade 2.2
It is the right choice for projects and contracts in most industrial and construction environments.
First Trace Heating Direct are never undersold in the TRACEJ range on a like for like basis.
SAFETRACE OFFERS "PLUG & GO" FEATURES WITH TOTAL CONTROL & SAFETY - SAFETRACE IS A FLEXIBLE FROST PROTECTION SOLUTION - FRIENDLY TO FIT & LOW RUNNING COST
SafeTrace is a quick and safe frost protection solution suitable for both DIY or specialist contractor.
Ideal for both metal and plastic pipes.
Supplied ready terminated with in-line moulded thermostat
(switches on at +5degC and off at +9degC)
The combination of self regulation and temperature control makes SafeTrace completely safe with maximum energy efficiency.
Available in various standard lengths c/w 1.5m long power cable factory fitted
If cable is too long, you can cut the cable end to length and re-seal with the spare end seal provided.
TRACEJ - CUT FROM THE REEL TO ORDER -- ANY LENGTH
We cut TRACEJ from the reel to order.
It is supplied in any length, and there is no material wastage, installation is simple and no special tools are required.
NEXT DAY DELIVERY
In addition, TRACEJ is totally safe for both plastic and metal pipes, and can be touching or overlapped without overheating or hot spots.
When you are unsure about the pipe material at the time of the enquiry there is no problem with TRACEJ - this adds security for the wholesaler and contractor.
Heating cables without an earthing facility are unsuitable for plastic pipes
is the right choice for projects and contracts in industrial and construction environments.
TRACEJ and its associated components can be purchased through the TRACE HTG. CAT.
in this web site.
TYPICAL FROST PROTECTION SCHEME
A typical scheme is a combination of heating cable, junction boxes and termination kits.
To operate the system with minimum power consumption a Sensaire ambient sensing temperature control is recommended; this should be set to activate the system at 5 degC.
It is possible to run several heating circuits from a single power supply point, and with Tee connections and loops, the most complex pipe system can be trace heated.
Wholesale Groups should refer to their Purchasing and Buying Guides for information on discounts and Terms of Trading with First Trace Heating Direct.
Methods of Payment:
i) In accordance with your Terms of Trading with First Trace Heating Direct, by cheque or BACS
ii) Credit Card
TRACEPAK - 30m packs, a simple kit containing:
30m reel of jacketed self regulating heating cable rated either 10 or 20w/m
2 off Connection & End Seal Termination Kits
1 off 20m Roll of Glass Cloth Fixing Tape
5 off Warning / Caution Labels
IDEAL AS CONTRACTOR PACKS
Important Note: Any size of TRACEPAK can be supplied, just ask and we will make up the pack and deliver next day.
PIPE-TRACE ...... NO MORE FROZEN PIPES
is a pre-packed ready terminated self regulating heating unit in standard lengths of 1, 2 and 3 metres.INSTANT D.I.Y. FROST PROTECTION
It is the simple and safe solution for pipe frost protection, especially for those troublesome pipes around the home, caravan, stables, sports pavilion, greenhouse, school etc.
The three standard sizes are each supplied in a clear plastic blister pack.NOTE: Any length of PIPE-TRACE can be ready terminated. Just specify the length required and it will be supplied ready for immediate installation